Apollo Surface Texture Paints are widely used in commercial and residential establishments to beautify surfaces such as walls, roofs, etc. and provide protection against dust and moisture. The Apollo Surface Texture Paints we provide is composed of top grade materials and they are of optimum quality. They inhibit fungus growth on walls, caused by moisture. We are counted among the reliable Manufacturers & Suppliers of Apollo Surface Texture Paints.
- The paints have special additives to prevent of algae and fungi.
- Larson texture is water repellent and extremely durable paint.
Technical Details :
- Physical State : Paste form
- Surface Hardness : 3-5 kn.
- Thickness : 1 mm to 2.5 mm
- Drying time : 4-5 Hrs., Full Cure - 72 Hrs.
- Coverage Area : See Product Technical Data
- Fields of Application : Exterior, Interior
- Surface For Use : Matured Cement Plaster, Ply & Board
Direction for Use :
- Old painted surface thoroughly to remove loose or flaking material. dust, Oil. Ensure that the surface is free form fungus, algae & moisture.
- Primer should be done with Larson by thinning 75% volume with clean water.
- Stair the container properly & strain before use.
- Apply only one coat.
- Thinning ratio 3-5% water by volume according to weather condition.
- Application can be done with different tolls. Wash tolls immediate after application.
- Time : The coating time should be 24-48 hours after priming, repair etc. maximum up to 90 days.
- Safety, Health & Eco Friendly information : Store the container in a cool and dry with lid tightly closed place. Keep out of reach of children. In case of contact with eyes rinse immediate with plenty of water.